temp
temp
temp
temp
temp-thumb
temp-thumb
temp-thumb
temp-thumb
Padder Plade Dryer

【Effective Volume】: 0.06-9.46m³

【Power】:2.2-90KW

【Heat Source】:Coal, oil, natural gas, timber.

【Application】:Drying particles, powder and paste material.

E-mail:lipu@lipuchina.com

get a quote online faq

Advantages:

KJG hollow paddle blade dryer is one kind of low-speed mixing type and continuous indirect heating equipment to conduct heat to dry (chill-down) materials by the hollow blade of sector structure. There are two pieces of parallel rotation axes of mounted staggered blades in the jacket structure cylinder of tis equipment, many pieces of hollow blade of sector structure mounted on each axis staggered by a certain interval, there are two kinds of blades (feeding shear plane and return shear surface), the axes rotate at low speed. The hot medium enters into the hollow rotary axes and blades through the rotary joint installed at the end of the rotating axes, be dried after heating, which will be discharged out of dryer through the rotary joint. In addition, the hot medium will be led into the jacket structure. Materials will be fed constantly through the feeding end, and which will be stirred and mixed through blades, and materials will be dried through heat conduction between the blades and jacket structure at the same time, and materials will be discharged while it’s being heated. The retention time can be adjusted by changing the height of the overflow weir. The raw materials will be fed into the dryer and will be conveyed the discharge port to be discharged out through the hollow paddle blades. The materials will be stirred by the hollow paddle blades during the conveying process, meanwhile, which will be dried through evaporation by the simultaneous heating of the hollow paddle blades and jacket structure, with high thermal efficiency. The continuously variable transmission is adopted and connects with the gear box in this dryer, 5-20rpm, the rotation speed can be adjusted according to material properties. The air is being exhausted from exhaust vent.

Products:

Paddle blade dryer is one kind of heat conduction based horizontal mixing and drying equipment. The required amount of heat for this equipment is rely on the indirect heating of heat conduction, so the air is not required or only little air is required in the drying process to take the moisture away, which greatly reduce the heat waste being taken away by the air and the utilization of heat is improved, it’s one kind of energy saving dryer and suitable for drying particles, powder and paste material.

Technical Parameters:


Model


Heat transfer area(m2)


Effective volume(m3)


Rotary speed

(r/min)


Power

(kW)


Overall dimension

(mm)

KJG3

3

0.06

15-30

2.2

2972×736×762

KJG9

9

0.32

10-25

4

4876×841×838

KJG13

13

0.59

10-25

5.5

5486×1066×1092

KJG18

18

1.09

10-20

7.5

5918×1320×1270

KJG29

29

1.85

10-20

11

6808×1474×1524

KJG41

41

2.8

10-20

15

7570×1676×1778

KJG52

52

3.96

10-20

30

8306×1854×2032

KJG68

68

5.21

10-20

45

9296×2134×2362

KJG81

81

6.43

5-15

55

9678×2286×2464

KJG95

95

8.07

5-15

75

9704×2438×2566

KJG110

110

9.46

5-10

90

9880×2668×2668


Contact Form

If you have any problems or questions about our products or need our support and assistance, please feel free to write us, we will reply to you within 24 hours, and never reveal your information to the third party. Thank you! All fields with an * are required.

© 2012 Lipu Heavy Industry Co., Ltd. All Rights Reserved.

Home | About  | Products  | Solutions  | News  | Service  | Contact  |

Google+